How To Oil Hair Clippers (The Best 5-Step Guide Online)

When it comes to mens’ grooming, there are many different tools out there that help to keep you looking as good as you can — including beard trimmers, combs, brushes, and more. Hair clippers are often the most popular and useful item for trimming your hair so that it doesn’t get too long and unruly, and with any pair of clippers, you’ll need to know how to take care of them. More specifically, you need to be aware of how to oil hair clippers.

how often should you oil your clippers

Even if you have the most reliable pair of hair clippers around, they’re going to start performing worse and worse as time goes on if you don’t treat them with the care and attention that they need.


Knowing how to clean trimmer blades and oil hair clippers helps to keep them working longer and stronger than if you never did this, and over the years, you’ll really start to notice the results of the work you put in here.

However, just where should you actually start with this whole process?

What is Hair Clipper Oil?

When you use a hair clipper, the blades in that device are moving extremely fast in order to provide you with the cut that you need. All of this motion creates for a lot of friction and heat, and as a result of this, you need to properly lubricate the blades so that they don’t get snagged up over time.

As you can probably guess at this point, this is what clipper oil aims to fix.

Along with helping to lubricate the blades of your clipper, oil also cleans out the blades so that they don’t get nasty from hair you’ve previously cut with them.

Similarly, how often should you oil your clippers?

You can choose to apply the oil whenever you’d like, but for the best results, we’d advise doing so when you notice that your clippers are noisier than usual, leave track marks, or start missing finer hairs while trimming.


How to Oil Hair Clippers


Cleaning/oiling your clippers isn’t the most difficult task in the world, but there are a few important steps to be aware of to ensure that you’re as effective as possible with the whole process.

The steps we’re about to go over will apply to pretty much every pair of clippers out there, but just keep in mind that some may differ ever so slightly depending on the exact model and brand of a clipper that you’re using.


With that said, let’s dive right into things.

Step 1

First thing’s first, you’ll need to get the cutter portion of your clippers pushed out. This can be achieved by pushing on either side of the unit so that the spring is lined up with the notch found in the cutter. Once you’re at this point, push it all the way out so that you’re able to view the back rail on either side of the spring.


Step 2

Next, squeeze out a small drop of clipper oil directly onto the two rear rails of the cutter. You’ll want to put the first drop of oil onto the rail that’s outside from the left-side spring, and after this, another drop can be placed on the rail that’s outside the spring on the right-hand side.

Step 3

For drop number 3, you’ll want to put it on the groove towards the very top of the cutter. What’s important to note is that if you don’t oil this grove every single day, you’ll notice that your blade emits an unpleasant screeching sound in addition to not cutting the way that it should.

If your blade guide becomes too dry, a myriad of issues can pop up, including cornrowing and much.

Step 4


For the four step, take the cutter and position it with the center of the blade you have. At this point, you can place a fourth drop of oil onto the teeth of the cutter while they’re still resting on a table or counter or once you put it back on the clipper itself.

This is really a matter of personal preference, but we’ve found that it’s usually easiest to oil the teeth when they’re still off of the main clipper body.

Step 5

Lastly, put a fifth and final drop of oil on the very center of the blade in the dead middle of the cutting area. However, it’s very important to note that you do not want to run a string of oil across the teeth of your clipper.


If you do this, the oil will make its way down throughout the many teeth and then gunk up.

Start applying the oil with the clipper up, and the oil will then naturally fall along the top part of the blade.


Again, while the exact way you go about this whole thing may differ from clipper to clipper, the steps that are listed here should generally be the same for all products.

To Use or Not to Use Homemade Clipper Oil


While talking about how to oil clippers, we’d like to briefly touch on the topic of homemade clipper oil.

There are tons of different hair clipper oil options to choose from, and in most cases, they don’t cost a ton of money. However, should you ever find yourself in a situation where you need to oil your clippers and you’re totally out of clipper oil, all hope is not lost.

If you’re in need of a homemade solution, any sort of oil that can sauté an onion should do the trick. The key here is to use an oil that will be able to withstand high levels of heat, so try to avoid the likes of extra virgin olive oil. Instead, vegetable and regular olive oil should do the trick.


While we certainly recommend using legit hair clipper oil whenever possible, you can use oils around your home every once in a while should you find yourself in a pinch.

Final Thoughts

Knowing how to oil hair clippers will help you get the absolute most out of them as time goes on, and as long as you pay attention to the steps mentioned throughout this guide, you shouldn’t run into any issues at all. Hair clippers are awesome tools for keeping yourself looking as great as can be, and with a little time spent oiling and cleaning them, they’ll perform admirably for a number of years to come.


Click Here to Leave a Comment Below 0 comments

Leave a Reply: